Ignition Coil-On-Plug: Removal
WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Remove the oil filler cap and then remove the engine appearance cover. Install the oil filler cap.
- 2.NOTE: When removing or installing the high-pressure fuel pump noise insulator, spreading the openings will reduce the risk of damage.
Remove the high-pressure fuel pump noise insulator retainer. Remove the high-pressure fuel pump noise insulator.
- 3.
Disconnect the ignition coil-on-plug electrical connectors and the high-pressure fuel pump electrical connector.
- 4.NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.
Remove the ignition coil-on-plug bolts and then remove the ignition coil-on-plugs.