Remote Start
The remote start system is controlled by the RKE system. For more information, REFER to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description .
Component Description
Body Control Module (BCM)
Refer to: Module Controlled Functions - System Operation and Component Description .
Gateway Module
The GWM translates messages between HS-CAN and MS-CAN. This allows a message to be distributed throughout the networks. REFER to: Communications Network - System Operation and Component Description .
Ignition Switch
Refer to: Steering Wheel and Column Electrical Components - System Operation and Component Description .
Integrated Keyhead Transmitter (IKT)
Refer to: Passive Anti-Theft System (PATS) - System Operation and Component Description .
Passive Anti-Theft Transceiver
Refer to: Passive Anti-Theft System (PATS) - System Operation and Component Description .
Powertrain Control Module (PCM)
The PCM provides power and ground to the starter relay to initiate cranking of the engine.
RTM
Refer to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description .