LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Engine Cooling - Diesel Engine -- F250-F550 Super Duty) >> Removal And Installation >> Cooling Fan Shroud - Lower >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the radiator. For additional information, refer to Radiator .
  2. Detach the lower cooling fan shroud from the cooling fan stator.
  3. Detach the power steering fluid cooler-to-power steering fluid reservoir hose retainer from the lower cooling fan shroud.
  4. Detach the Charge Air Cooler Temperature (CACT) sensor wiring harness retainer from the lower cooling fan shroud.
  5. Detach the horn wiring harness retainer from the lower cooling fan shroud
  6. Detach the 5 main wiring harness retainers from the lower cooling fan shroud.
  7. Detach the front impact severity sensor wiring harness retainer from the lower cooling fan shroud.
  8. Remove the lower cooling fan shroud from the vehicle.
  9. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals