LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Engine Cooling - Diesel Engine -- F250-F550 Super Duty) >> Removal And Installation >> Coolant Crossover Manifold Assembly >> Coolant Hoses and Tubes and Fuel Tube Brackets

Coolant Hoses and Tubes and Fuel Tube Brackets

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Coolant Hoses And Tubes And Fuel Tube Brackets Replacement Components With Torque Specifications
G07481631Courtesy of FORD MOTOR CO.
Item Part Number Description
1 8D037 Upper radiator hose spring clip (part of 8B274)
2 8B274 Upper radiator hose
3 8D058 Upper radiator hose O-ring seal (part of 8B274)
4 - Engine Coolant Temperature (ECT) sensor electrical connector (part of 12B637)
5 W503275 LH fuel tube bracket bolt
6 9K337 LH fuel tube bracket
7 W527333 Turbocharger coolant outlet hose clamp
8 4090 Turbocharger coolant outlet hose
9 W503275 RH fuel tube bracket bolt
10 9F911 RH fuel tube bracket
11 W500012 Heater inlet tube bolt (2 required)
12 18696 Heater inlet tube
13 8527 Heater inlet tube O-ring seal