Removal And Installation: Thermostat: Installation

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

1.
1. 1.
  
  Install a new O-ring seal and lubricate it with clean engine coolant.
  Material
  
  : Motorcraft® Orange Concentrated Antifreeze/Coolant / VC-3-B (WSS-M97B44-D)
1. 2.
  
  To install, reverse the removal procedure.

2.

Fill and bleed the cooling system. REFER to: Cooling System Draining and Vacuum Filling .

3.

Install the air cleaner outlet pipe. REFER to: AIR CLEANER OUTLET PIPE .