LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Engine Cooling - 5.0L 32V Ti-VCT) >> Removal And Installation >> Thermostat Housing >> Installation

Thermostat Housing: Installation

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    • Install a new thermostat housing gasket.
    • To install, reverse the removal procedure.

  1. 2.

    Fill and bleed the cooling system. REFER to: Cooling System Draining and Vacuum Filling .