LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 678 (Engine - 5.0L 32V Ti-VCT) >> Removal And Installation >> Oil Pump >> Removal

Oil Pump: Removal

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .

  1. 2.

    Remove the timing chains. Refer to: Timing Chain .

  1. 3.

    Remove the crankshaft sprocket.
GFD40532Courtesy of FORD MOTOR COMPANY

  1. 4.

    Remove the oil pan. Refer to: Oil Pan .

  1. 5.

    Remove the bolts and the oil pump screen and pickup tube.
    • Discard the O-ring seal.
GFD40533Courtesy of FORD MOTOR COMPANY

  1. 6.

    Remove the bolts, stud bolts and the oil pump.
GFD40534Courtesy of FORD MOTOR COMPANY