Removal And Installation: Flexplate: Installation

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

1.

Install the flexplate and the bolts.
Torque:

Stage 1: 177 lb.in (20 Nm)

Stage 2: 60°

Fig 1: Flexplate Tightening Sequence

Courtesy of FORD MOTOR COMPANY

2.

Install the transmission. Refer to: Transmission - 5.0L 32V Ti-VCT .

3.

After completing the repairs, perform the Misfire Monitor Neutral Profile Correction procedure using a diagnostic scan tool.