LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 676 (Engine - 3.5L DURATEC (209KW/284PS)) >> Removal And Installation >> Oil Pressure Switch >> Installation

Oil Pressure Switch: Installation

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    NOTE: If the oil pressure switch is to be reused, apply thread sealant.

    To install, reverse the removal procedure.

    Material

    : Thread Sealant with PTFE / TA-24-B (WSK-M2G350-A2)

scientia non olet · About LEMON Manuals