LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Instrument Panel And Console -- F250-F550 Super Duty) >> Removal And Installation >> Storage Compartment - Rear Seat >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat storage compartment partition.
  2. Remove the 6 rear seat storage compartment bolts.
    • To install, tighten to 15 Nm (133 lb-In).
  3. Disconnect the power point electrical connector and remove the rear seat storage compartment.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals