Power Point: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Power point cover may differ depending on location.

Open the power point cover.
Install the Power Point Socket Remover in one of the power point socket slots.

Fig 1: Installing Power Point Socket Remover In One Of Power Point Socket Slots
Courtesy of FORD MOTOR CO.
Position the Power Point Socket Remover so that it engages in the adjacent slot.

Fig 2: Positioning Power Point Socket Remover
Courtesy of FORD MOTOR CO.
Using the Power Point Socket Remover, pull the power point socket out of the retainer.

Fig 3: Pulling Power Point Socket Out Of Retainer Using Power Point Socket Remover
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector.