Ignition Switch - Vehicles With: Keyless Vehicle System: Removal
WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Lower the steering column opening trim panel.
Courtesy of FORD MOTOR COMPANY
|
- 2.
Remove the start/stop switch
- 1.
Disconnect the start/stop switch electrical connector.
- 2.
Release the start/stop switch tabs.
- 3.
Push the start/stop switch out of the steering column opening trim panel.
Courtesy of FORD MOTOR COMPANY
|