Symptom Chart(s)
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
Symptom Chart: Tire Wear
| Condition | Possible Sources | Actions |
|---|---|---|
| Inner edge/shoulder wear | Excessive toe out and/or negative camber Incorrect wheel and tire assembly rotation intervals High-speed cornering |
GO to Pinpoint Test A |
| Outer edge/shoulder wear | Excessive toe in and/or positive camber Incorrect wheel and tire assembly rotation intervals High-speed cornering |
GO to Pinpoint Test B |
| Heel/toe wear | Excessive toe in/out Incorrect wheel and tire assembly rotation intervals |
ROTATE the wheel and tire assemblies. CHECK the alignment, ADJUST as necessary. |
| Diagonal wear | Excessive toe in/out Incorrect tire rotation intervals |
GO to Pinpoint Test C |
| Loose, worn or damaged suspension components | REFER to: Suspension System . |
Symptom Chart: NVH
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
NVH symptoms should be identified using the diagnostic tools that are available. For a list of these tools, an explanation of their uses and a glossary of common terms, REFER to: Noise, Vibration and Harshness (NVH) . Since it is possible any one of multiple systems may be the cause of a symptom, it may be necessary to use a process of elimination type of diagnostic approach to pinpoint the responsible system. If this is not the causal system for the symptom, REFER to: Noise, Vibration and Harshness (NVH) for the next likely system and continue diagnosis.
| Condition | Possible Sources | Actions |
|---|---|---|
| Wobble or shimmy | Bent wheel | INSTALL a new wheel as necessary. |
| Damaged tire | INSTALL a new tire as necessary. | |
| Loose wheel nuts | TIGHTEN to specification. | |
| High-speed shake | Tires/wheels | REFER to Radial Runout Measurement - Loaded Hunter Road Force® Method or Radial Runout Measurement - Dial Indicator Method in Component Test- Radial Runout . |
| Vehicle vibration | Tires/wheels | REFER to Radial Runout Measurement - Loaded Hunter Road Force® Method or Radial Runout Measurement - Dial Indicator Method in Component Test- Radial Runout . |