Preliminary Inspection

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

1.

Road test the vehicle.
- If any suspension alignment or ride height concerns are present, REFER to Symptom Chart: Suspension System .
- Verify the customer concern by carrying out a road test on a smooth road. If any vibrations are present, REFER to Symptom Chart: NVH .

2.

Inspect the tires.
- Check the tire pressures with all normal loads in the vehicle and the tires cold. REFER to the VC label.
- Verify that all tires are sized to specification. REFER to the VC label.
- Inspect the tires for incorrect wear and damage. INSTALL new tires as necessary.

3.

Inspect the chassis and underbody.
- Remove any excessive accumulation of mud, dirt or road deposits from the chassis and underbody.
- Front or rear suspension components.
- Suspension fastener(s).
- Incorrect spring usage Spring(s).
- Shock absorber(s).
- Strut(s).
- Suspension bushing(s).
- Steering system components.
- Wheel bearing and wheel hub(s).

4.

Inspect for aftermarket equipment.
- Check for aftermarket changes to the steering, suspension, and wheel and tire components (such as competition or heavy duty). The specifications shown in this service information do not apply to vehicles equipped with aftermarket equipment.