LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Handles, Locks, Latches And Entry Systems -- F250-F550 Super Duty) >> Removal And Installation >> Ignition Lock Cylinder - Functional >> Installation

Ignition Lock Cylinder - Functional: Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure the ignition lock cylinder is in the ACC position.
  2. Insert the ignition lock cylinder into the ignition lock cylinder access hole located on the steering column.
    • Make sure to align the locking pin with the locking pin access hole.
  3. Install the Passive Anti-Theft System (PATS) transceiver. For additional information, refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .
  4. Rotate the ignition key through all lock cylinder positions to check for correct operation.
scientia non olet · About LEMON Manuals