LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Handles, Locks, Latches And Entry Systems -- F250-F550 Super Duty) >> Removal And Installation >> Hood Latch Release Handle >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the hood latch release cable A from the hood latch release cable B.
    1. Open the cable connector cover.
    2. Disconnect the hood latch release cable A.
      Fig 1: Identifying Cable Connector Cover And Hood Latch Release Cable A
      G06780726Courtesy of FORD MOTOR CO.
  2. Remove the hood latch release handle E-clip, release the return spring and position the hood latch release handle aside.
  3. Disconnect the hood latch release cable A and remove the hood latch release handle.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals