LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Handles, Locks, Latches And Entry Systems -- F250-F550 Super Duty) >> General Procedures >> Latch Lubrication

Latch Lubrication

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS

Item Specification
Multi-Purpose Grease
Motorcraft® XL-5 (aerosol) and/or CRC® SL3151		 ESB-M1C93-B
  1. Open the door.
  2. Using a screwdriver, fully close the latch (2 clicks).
    Fig 1: Closing Latch Fully Using Screwdriver
    G06071166Courtesy of FORD MOTOR CO.
  3. Spray the multi-purpose grease into the opening on the door latch for approximately 5 seconds.
    Fig 2: Spraying Multi-Purpose Grease Into Opening On Door Latch
    G06077610Courtesy of FORD MOTOR CO.
  4. Open the latch using either the interior or exterior door handle.
  5. Open and close the door several times to circulate the lubricant inside the latch.
  6. Wipe off any excess grease.
scientia non olet · About LEMON Manuals