LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Seat Cushion - Rear, SuperCab >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat. For additional information, refer to SEAT - REAR, SUPERCAB .
  2. Pull up and remove the pivot cover.
  3. Separate the affected RH or LH seat cushion assembly from the center support.
    Fig 1: Separating Seat Cushion From Center Seat Mount
    G06764123Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals