LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Seat - Front, 20 Percent >> Removal

Seat - Front, 20 Percent: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seats. For additional information, refer to SEAT - FRONT, BUCKET SEAT .
  2. For seats with under seat storage, pry up and remove the utility tray.
  3. For seats without under seat storage, disengage the pin-type retainers and lift the cushion cover and foam pad to access the front retainers.
    Fig 1: Locating Cushion Covers Pin-Type Retainers
    G07485890Courtesy of FORD MOTOR CO.
  4. Complete the removal by referring to the exploded view.