Disassembly and Assembly
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
60 percent shown in illustration, 40 percent similar.
- Remove the seat. For additional information, refer to SEAT - REAR, CREW CAB .
- Remove the 60 percent or 40 percent cushion. For additional information, refer to SEAT CUSHION - REAR, CREW CAB .
- Using a suitable tool, remove the grocery bag hooks (if equipped).
- Release the cushion trim cover J-clip.
- Release the 2 cushion trim cover side hook-and-loop strips.
- Invert the seat cushion trim cover and release the hook-and-loop strips.
- Remove the hog rings.
- Remove the cushion trim cover from the cushion foam pad.
- Remove the cushion foam pad from the cushion frame.
- To assemble, reverse the disassembly procedure.
NOTE:
Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the cushion foam.