LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Seat System -- F250-F550 Super Duty) >> Disassembly And Assembly >> Seat Backrest - Rear, SuperCab >> Disassembly and Assembly

Disassembly and Assembly

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the backrest. For additional information, refer to SEAT - REAR, SUPERCAB .
  2. Release the backrest trim cover J-clips.
  3. Remove the backrest foam pad and backrest trim cover from the backrest frame.
  4. Remove the backrest trim cover from the backrest foam pad.
  5. Remove the seat support.
  6. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals