Climate Controlled Seats
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The climate controlled seat system is able to heat and cool the driver and front passenger seats. Each climate controlled seat is operated by push-buttons on the HVAC module located on the instrument panel. Each front seat temperature is monitored and controlled by the Dual Climate Controlled Seat Module (DCSM) located on the passenger front seat track.
The climate controlled seat system contains the following serviceable components:
- Air filter attached to each Thermo-Electric Device (TED) and blower assembly (for cushion TED filter, turn to the left to remove. The backrest TED filter is not serviceable but can be removed.) For additional information, refer to the Owner's Literature.
- Cushion and backrest foam pads
- Cushion and backrest manifolds
- DCSM attached to the passenger seat track
- HVAC module located in the instrument panel (contains the climate controlled seat switches and is also the electrical interface to the DCSM)
- TED and blower assembly within each front driver and passenger seat cushion and backrest