LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 609 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Hood Latch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Mark the location of the hood latch with a permanent-type marker.

    Remove the 2 hood latch bolts and position the hood latch aside.

    • To install, tighten to 35 Nm (26 lb-ft).
  2. Disconnect the primary hood latch release cable.
  3. Disconnect the secondary hood latch release cable.
  4. Remove the hood latch.
  5. To install, reverse the removal procedure.
    • When the hood latch is installed, the latch adjustment must be checked to make sure the latch is installed and aligned correctly.
scientia non olet · About LEMON Manuals