Keyless Entry Keypad

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

The keyless entry keypad (if equipped), located in the exterior handle of the driver door, provides a method for the customer to access the vehicle without a key or RKE transmitter. The keyless entry keypad feature:

Locks all doors
Unlocks the driver door
Unlocks all doors
Programs/erases the customer keypad code
Enables/disables auto-locking
Enables/disables auto-unlocking
Illuminates the keypad
Illuminates the interior lamps

The keyless entry keypad feature operates independently of key position status, vehicle speed, or transmission position. When a keyless entry keypad button is pressed, the keyless entry keypad buttons illuminate to provide better visibility. If buttons 7/8 and 9/0 are pressed simultaneously or 5 seconds have elapsed since the last button press, the illumination is turned off.

Vehicles equipped with a keyless entry keypad are programmed with a factory set 5-digit entry code. This code is provided to the customer on a wallet card in the Owner's Literature package. In addition, this code is available through the use of a scan tool and is printed on the BCM label located on the back side of the module (installed position). When entering codes, each digit must be entered within 5 seconds of the previous button press. The BCM accepts the programming of 3 personal entry codes. Refer to KEYLESS ENTRY KEYPAD CODE PROGRAMMING for programming information.