LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 608 (Instrument Panel And Console) >> Removal And Installation >> Instrument Cluster Finish Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake.
  2. Place the selector lever in the 1 position.
  3. Position the steering wheel downward.
    G08344223
  4. Remove the 2 instrument cluster finish panel screws and remove the instrument cluster finish panel.
    • Release the gap hider retainers.
    • Pull the instrument cluster finish panel toward the rear of the vehicle to release the retaining clips.
      G07964106
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals