Removal and Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RH shown, LH similar.

NOTE: For parts identification and location, refer to SEAT - EXPLODED VIEW, REAR, CREW CAB .

NOTE: The seat backrest latch is only accessible when the seat cushion is raised.

Release the backrest latch.
- From behind the backrest, pull up on the latch release and pull the backrest forward.
- Release the cushion latch and lower the cushion and backrest.
  
  Fig 1: Removing Backrest Latch
  Courtesy of FORD MOTOR CO.
Remove the 2 bolts and backrest latch.
- To install, tighten to 10 Nm (89 lb-in).
To install, reverse the removal procedure.