LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (Seat System - Seats) >> Removal And Installation >> Seat - Rear, Super Cab >> Removal

Seat - Rear, Super Cab: Removal

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Seat backrest removal 

  1. Release the 2 backrest latches.
    • Locate the 2 access holes in the backrest frame aligned with the inboard edge of the child safety seat anchors and insert a suitable tool through the access holes.
      • Be careful not to damage the seat trim covers.
    • Push in and release the 2 backrest latches.
      • Push the backrest down slightly to allow the latches to release, then raise the backrest away from the latch.
        Fig 1: Removing Backrest Latches Using Tool
        G06173600Courtesy of FORD MOTOR CO.
  2. Raise the backrest and release the upper clips.
  3. Route the backrest through the center safety belt webbing and remove.

    Seat cushion removal 

  4. With the backrest removed, remove the 4 rear seat nuts.
    • Position the rear center safety belt anchor aside.
    • Remove the safety belt buckle.
  5. Remove the spare tire jack to access the front seat bolts.
  6. Remove the 3 front seat bolts and seat cushion.