LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 603 (Interior Trim And Ornamentation) >> Removal And Installation >> Cowl Side Trim Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Both sides 

  1. Pull upward to release the scuff plate clips and remove the front door scuff plate.
    • Detach the scuff plate from the weatherstrip.
      Fig 1: Locating Scuff Plate Clips
      G06173095Courtesy of FORD MOTOR CO.

    LH side 

  2. Remove the cowl trim panel.

    RH side 

  3. Remove the fuse panel access door.
    Fig 2: Locating Fuse Panel Access Door
    G06173096Courtesy of FORD MOTOR CO.
  4. Remove the pin-type retainer from the cowl trim panel.
    Fig 3: Locating Cowl Trim Panel Pin-Type Retainer
    G06173097Courtesy of FORD MOTOR CO.

    Both sides 

  5. Remove the cowl trim panel.
  6. NOTE: Make sure the cowl side trim panel J-hook is correctly installed.

    To install, reverse the removal procedure.