LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Interior Trim And Ornamentation -- F250-F550 Super Duty) >> Removal And Installation >> Cab Rear Trim Panel - Regular Cab >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat(s) in the forwardmost position.
  2. Remove the RH and LH B-pillar trim panels. For additional information, refer to B-PILLAR TRIM PANEL - REGULAR CAB .
  3. Remove the 4 cab rear trim panel pushpin retainers.
    Fig 1: Locating Cab Rear Trim Panel Pushpin Retainers
    G06779590Courtesy of FORD MOTOR CO.
  4. Remove the cab rear trim panel.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals