IKT With Remote Start
WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
The vehicle comes equipped from the factory with two programmed IKTs . The IKT incorporates both the PATS functions and the Remote Keyless Entry (RKE) transmitter functions in a single device. During key programming procedures, the PATS and RKE transmitter of an IKT are both programmed into the BCM . In addition to the IKTs , conventional PATS keys can also be programmed to the vehicle if requested by the customer. The BCM accepts the programming of up to 8 keys. Of those 8 keys a maximum of 4 IKTs can be programmed. If more than 4 IKTs are programmed, INT KEY COULD NOT PROGRAM is displayed in the message center during the key programming procedure and the RKE function of that IKT is non-functional.