Sync System

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

SYNC SYSTEM

Condition	Possible Sources	Action
All SYNC® Services features are inoperative or inaccurate (traffic, directions, and information)	Refer to the PINPOINT TEST	PERFORM the APIM Reset, REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET . If the concern is still present, GO to PINPOINT TEST O .
The SYNC® system voice or tone prompts, Text-To-Speech (TTS) feature, or ringtones are inoperative or do not operate correctly	Refer to the PINPOINT TEST	PERFORM the APIM Reset, REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET . If the concern is still present, GO to PINPOINT TEST N .
During a phone call, no incoming audio is heard in the vehicle	Refer to the PINPOINT TEST	PERFORM the APIM Reset, REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET If the concern is still present, GO to PINPOINT TEST N .
Voice recognition is inoperative or does not operate correctly	Refer to the PINPOINT TEST	PERFORM the APIM Reset, REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET . If the concern is still present, GO to PINPOINT TEST P .
During a phone call, poor quality or no outgoing audio is heard on the outside device	Refer to the PINPOINT TEST	PERFORM the APIM Reset, REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET . If the concern is still present, GO to PINPOINT TEST P .
No sound from all SYNC® audio sources (Bluetooth, USB, audio input jack)	Refer to the PINPOINT TEST	PERFORM the APIM Reset, REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET . If the concern is still present, GO to PINPOINT TEST M .
The SYNC® steering wheel switches are inoperative or do not operate correctly	Refer to the PINPOINT TEST	PERFORM the APIM Reset, REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET . If the concern is still present, GO to PINPOINT TEST V .
All media hub functions are inoperative or do not operate correctly (USB ports, Secure Digital (SD) card, and RCA jacks)	Refer to the PINPOINT TEST	PERFORM the APIM Reset, REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET . If the concern is still present, GO to PINPOINT TEST Q .
The USB port(s) are/is inoperative or do/does not operate correctly	Refer to the PINPOINT TEST	PERFORM the APIM Reset, REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET . If the concern is still present, GO to PINPOINT TEST R .
The Secure Digital (SD) card slot is inoperative or does not operate correctly	Refer to the PINPOINT TEST	PERFORM the APIM Reset, REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET . If the concern is still present, GO to PINPOINT TEST S .
The RCA jacks are inoperative or do not operate correctly	Refer to the PINPOINT TEST	PERFORM the APIM Reset, REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET . If the concern is still present, GO to PINPOINT TEST T .
Unable to pair Bluetooth device	Refer to the PINPOINT TEST	PERFORM the APIM Reset., REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET . If the concern is still present, GO to PINPOINT TEST U .
An individual Bluetooth device feature is inoperative (text messaging, media playback or controls, phone book download, call history, or call waiting)	Customer's device compatibility	PERFORM the APIM Reset, REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) RESET . If the concern is still present, INSTRUCT the customer to review the device compatibility list. REFER to www.syncmyride.com. It is normal operation for unsupported or incompatible Bluetooth features to be unavailable through the SYNC® system. If the inoperative feature is compatible, ADVISE the customer to check their device for firmware updates, and if required, reset their device following the manufacturer's instructions.
911 Assist™ or Vehicle Health Report (VHR) is inoperative or does not operate correctly	Unregistered SYNC® owner account RCM misconfiguration IPC misconfiguration	Verify that the customer has a SYNC® Owner Account on www.syncmyride.com. This error message appears due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the IPC or RCM . If there have been recent service actions with the IPC or RCM , REPEAT/PERFORM the Programmable Module Installation (PMI) procedure as directed by the diagnostic scan tool. REFER to: MODULE CONFIGURATION . If there have been no recent service actions, refer to APIM HARDWARE TESTING .