Steering Gear: Notes

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOLS CHART

	Remover, Differential Bearing 205-008 (T57L-4220-A)
	Remover, Steering Arm 211-003 (T64P-3590-F)

MATERIAL SPECIFICATIONS

Item	Specification
MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada)	MERCON® V

NOTE: F250/350 shown in the illustration, F450/550 similar.

Fig 1: ABS Module Electrical Connector And Pressure Line Retainer With Torque Specifications

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	2C186	Hydraulic Control Unit (HCU)
2	-	ABS module electrical connector (part of 14405)
3	85160	Pressure line retainer
4	-	Pressure line retainer (part of 3A717)
5	3A719	Pressure line
6	-	Return hose-to-steering gear fitting (part of 3A713)
7	98005	O-ring seal
8	-	Pressure line-to-steering gear fitting (part of 3A719)
9	98005	O-ring seal
10	3A713	Return hose
11	3A713	Pressure line retainers (2 required)
12	3504	Steering gear
13	3590	Sector shaft arm
14	W709296	Sector shaft arm-to-sector shaft nut
15	W710907	Nut retainer cap
16	712367	Inner drag link-to-sector shaft arm nut
17	N642569	Cotter pin
18	3B406	Drag link
19	N803942	Lower steering column shaft-to-steering gear bolt
20	3F540	Steering gear shield
21	W711886	Steering gear bolts (3 required) (F250, F350 and F450 Pickup)
21	W711913	Steering gear bolts (3 required) (F450/550 Chassis Cab)