LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Power Steering System -- F250-F550 Super Duty) >> Removal And Installation >> Power Steering System - Exploded View >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Refer to exploded view(s) and any Warnings, Notices, Notes, Materials, Specifications and Special Tools. Items in the exploded views may not be listed in order of removal.
  2. It may be necessary to remove the LH fender splash shield to access the steering components. For additional information, refer to FRONT END BODY PANELS .
  3. For vehicles equipped with a 6.7 L engine, remove the degas bottle to access the power steering pressure lines. For additional information, refer to ENGINE COOLING - DIESEL ENGINE .
  4. Fill the power steering system. For additional information, refer to STEERING SYSTEM .