LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 588 (Parking Aid System) >> Removal And Installation >> Parking Aid Module (PAM) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the PAM  electrical connector.
  2. Remove the 2 PAM  nuts.
  3. Remove the PAM  .
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals