LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 586 (Instrument Cluster Illumination And Panel Illumination) >> Removal And Installation >> Instrument Panel Dimmer Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel side finish panel.
  2. NOTE: The instrument panel dimmer switch is removed by pushing from behind.

    Remove the instrument panel dimmer switch and bezel assembly from the instrument panel.

    • Disconnect the electrical connectors.
  3. Release the tabs and separate the instrument panel dimmer switch from the bezel.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals