LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 582 (Transfer Case) >> In - Vehicle Repair >> Transfer Case Rear Output Shaft Seal >> Installation

Transfer Case Rear Output Shaft Seal: Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the Input Shaft Oil Seal Installer, install the rear output shaft seal.
    Fig 1: Installing Rear Output Shaft Seal Using Input Shaft Oil Seal Installer
    G06128037Courtesy of FORD MOTOR CO.
  2. Install the rear driveshaft. For additional information, refer to DRIVESHAFT .
scientia non olet · About LEMON Manuals