LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 581 (Automatic Transmission External Controls) >> Removal And Installation >> Selector Lever Bezel >> Installation

Selector Lever Bezel: Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical harness to the selector lever bezel.
    G08341269
  2. Install the selector lever bezel onto the selector lever housing.
    G08341268
  3. Connect the select shift and the Tow/Haul electrical connectors and install the selector lever knob.
  4. Install a new LH selector lever knob screw.
    G08341254
  5. Install a new RH selector lever knob screw.
    G08341253
  6. Install a new LH selector lever knob cover.
    G08341257
  7. Install a new RH selector lever knob cover.
    G08341258
  8. Connect and install the floor console upper finish panel.
    G08341259
  9. Install the instrument panel to floor console finish panel.
    G08341262
scientia non olet · About LEMON Manuals