LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 580 (Automatic Transmission Cooling System) >> Removal And Installation >> Transmission Fluid Cooler >> Installation

Transmission Fluid Cooler: Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transmission fluid cooler.
  2. Install a new transmission fluid cooler outlet hose clamp.
  3. Install the transmission fluid cooler outlet hose to the transmission fluid cooler.
    Fig 1: Locating Transmission Fluid Cooler Outlet Hose Clamp
    G06171459Courtesy of FORD MOTOR CO.
  4. Install a new transmission fluid cooler inlet hose clamp.
  5. Install the transmission fluid cooler inlet hose to the transmission fluid cooler.
    Fig 2: Locating Transmission Fluid Cooler Inlet Hose Clamp
    G06171458Courtesy of FORD MOTOR CO.
  6. Fill the transmission with transmission fluid. For additional information, refer to Transmission Fluid Level Check in AUTOMATIC TRANSAXLE/TRANSMISSION - 6R80 .
  7. Check for leaks.
scientia non olet · About LEMON Manuals