Section 58 (Anti-Lock Brake System And Stability Control -- F250-F550 Super Duty): Specifications
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity | ||
|---|---|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) |
WSS-M6C62-A or WSS-M6C65-A1 | 1700 ml-2025 ml (3.59 pt-4.27 pt)(1) | ||
|
||||
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| ABS module screws | 3 | - | 27 |
| Degas bottle bolts (gasoline engine) | 16 | - | 142 |
| Degas bottle bolts (diesel engine) | 25 | 18 | - |
| Front wheel speed sensor bolt (Rear Wheel Drive (RWD)) | 25 | 18 | - |
| Front wheel speed sensor bolt (Four-Wheel Drive (4WD)) | 18 | - | 159 |
| Front wheel speed sensor harness bolts | 12 | - | 106 |
| Hydraulic brake tube fittings (brake caliper tubes) | 23 | 16 | - |
| Hydraulic brake tube fittings (master cylinder tubes) | 25 | 18 | - |
| Hydraulic Control Unit (HCU) -to-HCU bracket bolt | 15 | - | 133 |
| HCU bracket-to-body bolt | 25 | 18 | - |
| HCU bracket-to-body nuts | 25 | 18 | - |
| Rear wheel speed sensor bolt (four channel) | 20 | - | 177 |
| Rear wheel speed sensor bolt (three channel) | 20 | - | 177 |