LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Anti-Lock Brake System And Stability Control -- F250-F550 Super Duty) >> Removal And Installation >> Steering Wheel Rotation Sensor >> Installation

Steering Wheel Rotation Sensor: Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the arrow on the inner ring of the sensor to the notch on the sensor body.
    Fig 1: Locating Inner Ring Of Sensor To Notch On Sensor Body
    G07479202Courtesy of FORD MOTOR CO.
  2. Position the sensor on the Steering Column Control Module (SCCM).
  3. Install the clockspring. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
scientia non olet · About LEMON Manuals