Turbocharger Boost Pressure (TCBP)/Charge Air Cooler Temperature (CACT) Sensor - 3.5L GTDI: Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Install the TCBP /CACT sensor and the 2 screws.
- Tighten to 3 Nm (27 lb-in).
Connect the TCBP /CACT sensor electrical connector.
Install the ACL outlet tube. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING .