LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 579 (Electronic Engine Controls) >> Removal And Installation >> Mass Air Flow (MAF) Sensor - 3.7L, 5.0L (4V), 6.2L (2V) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Mass Air Flow (MAF) sensor electrical connector.
  2. Remove the 2 screws and the MAF  sensor.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals