Manifold Absolute Pressure (MAP)/Intake Air Temperature 2 (IAT2) Sensor - 3.5L GTDI: Removal
WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Turbocharger Boost Pressure (TCBP)/Charge Air Cooler Temperature (CACT) sensor and the Manifold Absolute Pressure (MAP)/Intake Air Temperature 2 (IAT2) sensor are not interchangeable.
- Disconnect the MAP /IAT2 sensor electrical connector.
- Remove the bolt and the MAP /IAT2 sensor.