LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 572 (Engine Controls - Fuel Charging And Controls - 6.2L (2V)) >> Removal And Installation >> Throttle Body >> Removal

Throttle Body: Removal

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Air Cleaner (ACL) outlet tube. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING .
  2. Disconnect the heater coolant hose retainer from the ACL  outlet pipe-to-Throttle Body (TB) adapter.
  3. Disconnect the crankcase ventilation tube quick connect fitting from ACL  outlet pipe-to-TB  adapter. For additional information, refer to FUEL SYSTEM - GENERAL INFORMATION .
  4. Disconnect the brake booster vacuum hose from the ACL  outlet pipe-to-TB  adapter.
  5. Remove the 2 bolts and the ACL  outlet pipe-to-TB  adapter.
  6. Loosen the clamp and disconnect the TB  adapter from the TB  .
  7. Disconnect the Electronic Throttle Control (ETC) electrical connector.
  8. Remove the 4 bolts and the TB  assembly.
    • Discard the TB  O-ring seal.
scientia non olet · About LEMON Manuals