LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 568 (Engine Cooling System) >> Diagnosis And Testing >> Engine Cooling >> Component Tests >> Coolant System Pressure Test - Coolant Expansion Tank Systems >> Pressure Relief Cap Pressure Test

Pressure Relief Cap Pressure Test

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the pressure relief cap and seals for damage or deterioration. Install a new pressure relief cap if necessary.
  2. Using the correct adapter, fit the pressure relief cap to the Radiator Tester.
  3. NOTE: If the plunger of the pressure tester is pressed to fast, an incorrect pressure reading results.

    Slowly press the plunger of the pressure test pump until the pressure gauge stops increasing and note the highest pressure reading. Release the pressure and repeat the test. Install a new pressure relief cap if the pressure is not within the pressure listed in the SPECIFICATIONS  .

scientia non olet · About LEMON Manuals