LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 565 (Anti-Lock Brake System (Abs) And Stability Control) >> Removal And Installation >> Wheel Speed Sensor Ring - Rear >> Removal

Wheel Speed Sensor Ring - Rear: Removal

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Axle Shaft And Wheel Speed Sensor Ring
G07958237Courtesy of FORD MOTOR CO.
Item Part Number Description
1 4234 Axle shaft
2 2C189 Wheel speed sensor ring
  1. Remove the rear axle shaft. For additional information, refer to REAR DRIVE AXLE/DIFFERENTIAL - FORD 8.8-INCH RING GEAR or REAR DRIVE AXLE/DIFFERENTIAL - FORD 9.75-INCH RING GEAR .
  2. Using a suitable driver, remove the wheel speed sensor ring from the axle shaft and discard the ring.
    Fig 2: Identifying Wheel Speed Sensor Ring And Axle Shaft
    G07958238Courtesy of FORD MOTOR CO.