LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 561 (Parking Brake System - Parking Brake & Actuation) >> Removal And Installation >> Parking Brake Shoes >> Installation

Parking Brake Shoes: Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Using specified grease, lubricate the parking brake shoes where the shoe contacts the actuator lever and the support bracket.

    Apply the substance from the specified tube.

    G07958151
  2. NOTE: Completely retract the parking brake adjusting screw before installation.

    To install, reverse the removal procedure.

  3. Adjust the parking brake shoe. For additional information, refer to PARKING BRAKE SHOE ADJUSTMENT .
  4. Reload the tension on the parking brake cable. For additional information, refer to PARKING BRAKE CABLE TENSION RELEASE .
scientia non olet · About LEMON Manuals