LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 555 (Wheel Hubs And Bearings - 9.75 Inch Ring Gear) >> In-Vehicle Repair >> Differential Housing Cover >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Separate the 3 brake tube fasteners from the differential housing cover stud bolts.
    G07957461
  3. Remove the differential housing cover.
    1. Remove the 9 differential housing cover bolts and the 3 differential housing cover stud bolts, and drain the lubricant from the axle housing.
    2. Remove the differential housing cover.
      G07957462
scientia non olet · About LEMON Manuals