General Specifications
WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Available drive pinion bearing adjustment shim in steps of 0.25 mm (0.010 in) | 0.254-0.965 mm (0.010-0.038 in) |
| Backlash between ring gear teeth and pinion teeth | 0.203-0.304 mm (0.008-0.012 in) |
| Differential case maximum runout | 0.076 mm (0.003 in) |
| Pinion bearing rotational preload | 1.5-3.0 Nm (13-26 lb-in) |
| Ring gear maximum variation between teeth backlash | 0.102 mm (0.004 in) |
| Maximum axle shaft flange runout | 0.279 mm (0.011 in) |