Removal and Installation
WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
High and Low Series
- Remove the driver air bag module. For additional information, refer to DRIVER AIRBAG
.
Low Series
- Using a suitable flat-bladed tool, detach the steering wheel switch from the steering wheel.
- Disconnect the electrical connector and remove the switch.
High Series
- Remove the steering wheel switch bezel.
- Disconnect the steering wheel switch electrical connector.
- Remove the 2 screws and the steering wheel switch.
High and Low Series
- To install, reverse the removal procedure.